MT-X4-HB ATxmega32a4 (ATxmega32d4) header board

MT-X4-UX Features

*   Atmel XMEGA 32A(D)4, 32KB flash, 4KB RAM, 1KB EEPROM
*   32.768KHz or 16MHz crystal included and installed
*   Reset Button
*   PDI Header
*   Ferrite bead on AVCC
*   PCB measures 5.2cm x 2.05cm (DIL-40 with standard 0.1” pin spacing)

Documentation

Note that the manual is for the MT-X4-UX, which includes a USB module mounted to the header board (see other listing).

   User Manual (In progress)

Schematic

Note that the schematic is for the MT-X4-UX, which includes a USB module mounted to the header board (see other listing).

The MT-X4-HB header board is just the left half of the schematic.

When a 16MHz crystal is used, 22pF crystal capacitors are installed (6pF with the 32.768KHz crystal)




Shipping for the A variant (ATxmega32a4) is available to the following countries only (sorry, no exceptions):
USA, Austria, Australia, Bulgaria, Belgium, Canada, Cyprus, Czech Republic, Estonia, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Japan, Latvia, Lithuania, Luxembourg, Malta, Netherlands, New Zealand, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey, United Kingdom

Due to export restrictions, further information sent via email may be required.

The D variant (ATxmega32d4) is available worldwide.
Note that the photos do not show the included crystal.
The actual button has a lower profile than shown.
Standard or machined-pin headers are available.